1 2

Bay Window Iron Curtain Rod

Bay Window Iron Curtain Rod

$0.00 USD
$0.00 USD
Sale Sold out
Shipping calculated at checkout.

Design the perfect Bay window iron curtain rod from hundreds of possible combinations below and click add to cart. Choose your favorite finish, mount, finial or 90 degree return to finish off your custom curtain rod. 

Bay windows typically have 45 degree or 90 degree bend. 

7/8" rods over 72" and 1-1/4" rods over 94" long will require center support mounts.

Bypass mounts and C-Rings are required if you need the curtain to draw past the support mounts. 

90 degree radius bends are exclusive to our 7/8" rods. Corner Curtain rods made of 1 1/4" diameter rod with have a mitered (sharp) corner. 

 

Measurement Guide

How to measure the angle of my bay window

Most bay window angles are 135 degrees, (which is a 45 degree bend to a straight rod). There are many ways to measure or determine the angle. This page will allow you to measure the angle without any special tools or knowledge. If the angles in your project are other than 45 or 90, you will need custom bends.
To measure the angle, you are simply going to create a triangle using the walls as two 12″ sides and then provide the length of the third side of that triangle by following the easy steps below.

  1. Measure 12″ from the back corner along the side wall and make a small (light) pencil mark on the wall.
  2. Measure 12″ from the back corner along the back wall and make a small (light) pencil mark on the wall.
  3. Measure the distance between your two pencil marks and enter that number

Left Wall Angle

Your custom bend angle is:

Right Wall Angle

Your custom bend angle is:

Need to convert from centimeters to inches?

Our rod measurements are collected in inches, use the calculator to determine what length rod you need

Your rod length in inches is:

View full details

Measuring Guide

Details & Dimensions

Patina Finishes

Shipping Information

Installation Guide

Additional Information

Details & Dimensions

Choose the 7/8″ diameter or the 1-1/4″ for your corner rods. The 7/8″ rod comes with radius corner and the 1 1/4″ rod comes with a mitered corner.

Bay window rods come in three pieces. Rest assured, we can easily guarantee that any of our joined curtain rods will be as strong and functional as a one-piece curtain rod. When our rods are split for shipping, they and joined together internally with a center connector so there is never a bump for your curtains to hang up on.

Bypass Mounts and C-Curtain Rings are recommended for all rods with corner bends to allow your draperies to stack neatly into the corners of the window.

Order changes on custom curtain rods can be made within 24 hours of placing the order. Since all curtain rods are custom cut to your measurements, we can not make changes after the 24 hours.

All hardware selected with you curtain rod will be treated with the same patina finish, this includes the rod, mounts, finials, curtain rings and supplied hardware.

Antique Black
Our antique black finish is a very deep flat black reminiscent of the hand applied carbon and wax finishes used by yesterday’s blacksmiths.

Iron Oxide
Our hand applied iron oxide patina finish is the most versatile finish we produce. It is the correct choice for rustic and Tuscan decor and blends perfectly with your oil rubbed bronze, rusty brown, or black iron decor.

Aged Silver
Our hand applied burnished silver patina finish has rich nickel silver highlights with antique black iron undertones and blends well with stainless or nickel accessories and decor.

Antique Gold
Our hand applied antique gold patina finish has rich deep gold highlights with antique black iron undertones reminiscent of Spanish and Italian treasure.

Curtain rod orders within 3-4 weeks via UPS ground. Custom made parts and custom plate cutting like t-straps and hinges may take a few weeks.

The maximum length we can ship curtain rods in one piece is 94″ however, we will generally split curtain rods at the mounting points if over 80″. We have developed a system that is invisible, strong, easy to assemble, and will allow you to build a high-quality curtain rod without concern of sagging or poor performance.

To order a French Return on one side only, use the "Special Instructions" box to tell us which side needs an end mount or finial and which side needs a 90-degree return.

Hand-forged custom wrought iron drapery rods

Finely finished, personalized and custom wrought iron curtain rods and hand forged iron hardware crafted from our Paso Robles, California design studio and blacksmith shop.

At Paso Robles Ironworks we’ve created elegant iron curtain rods and drapery hardware, hand forged door and cabinet hardware, and exquisite iron bathroom fixtures. These details throughout your space infuse their magic, forged by fire, in ways you never knew were so significant until now. Founded by a blacksmith in 1985 who knows Paso as a city of cowboys long before it was revered for its vineyards and olive groves. California design with European inspired details, these finely finished wrought iron accessories add character to homes and hotels across the U.S.