Tuscan Iron Push Plate

Door hardware typically ship within 1-7 business days or UPS

To install Push Plate, follow these steps: Gather Tools: You will need a tape measure, pencil, drill, screwdriver, and level. 1"-#8 Screws provided with caps. Measure and Mark: Determine the placement of the door hardware by measuring and marking where the holes will go. Pre-drill Holes: Use a drill to create holes at the marked locations. Insert Screws: Drill pilot hole into the marked locations on the door. Attach Hardware: Line up door hardware with pilot holes. Hardware includes a screw, black washer, silver washer, and plastic cap to give the look of a rivet. First, drop the silver washer on the screw to cup up over the screwhead. Second, twist on the black washer in that same orientation (will sit between the mounting service and cap). Drill the screw into the mounting surface and tighten the screws with a screwdriver, being careful not to over-tighten. Finish by snapping the plastic cap onto the silver washer.