1 1

Double Corner Curtain Rod

Double Corner Curtain Rod

$0.00 USD
$0.00 USD
Sale Sold out
Shipping calculated at checkout.

Design the perfect Double iron curtain rod from hundreds of possible combinations below and click add to cart. Choose your favorite finish, mount and finial to finish off your custom curtain rod. 

Sheer rod has a 2-1/4″ Projection to center rod and Front Rod has a 5-1/2″ Projection from wall to center rod. 

Double Rods over 72" long will require center support mounts, over 144″ requires two, over 215″ requires three and so on. 

Bypass mounts and C-Rings are required if you need the curtain to draw past the support mounts.

 

Need to convert from centimeters to inches?

Our rod measurements are collected in inches, use the calculator to determine what length rod you need

Your rod length in inches is:

View full details

Details & Dimensions

Measuring Guide

Patina Finishes

Shipping Information

Installation Guide

Additional Information

Corner curtain rods will be split and shipped in multiple pieces. Rest assured, we can easily guarantee that any of our joined curtain rods will be as strong and functional as a one-piece curtain rod. When our rods are split for shipping, they and joined together internally with a center connector so there is never a bump for your curtains to hang up on. Mounting brackets will be placed where the rods join together.

Bypass Mounts and C-Curtain Rings are recommended for all rods with corner bends to allow your draperies to stack neatly into the corners of the window.

Sheer rod has a 2-1/4″ Projection to center rod and Front Rod has a 5-1/2″ Projection from wall to center rod.

The sheer rod is 7/8" diameter and will come with round end cap finials.

Double curtain rods over 72″ long will require center support mounts.

90-degree French return bends are exclusive to our 7/8″ rods.

Corner Curtain rods made of 1 1/4″ diameter rod with have a mitered (sharp) corner instead of a rounded bend.


Order changes on custom curtain rods can be made within 24 hours of placing the order. Since all curtain rods are custom cut to your measurements, we can not make changes after the 24 hours.

How to measure windows for Corner Drapery Rods:

Put the end of the tape measure into the corner of the room and measure past the window to the point where you want the rod to end and the finial to begin. Be sure to add enough on the side so that the drapes will block the light around the side of the window, and allow the drape to slide sufficiently off of the window when they are opened. Now do the same thing in the other direction for the other window. These measurements are the measurements we want.

Do not subtract or add anything, we will do the math for the projection of the rod.

Make sure you have room beyond these measurements for the drapery rod finials you have selected.

For Corner curtain Rod with a French Return Leave enough room on the outside end of the return for your curtains to wrap around the rod, a 3″ minimum clearance is recommended.

For inside mounted rods (mounted to the wall perpendicular the window wall), measure the opening and provide that measurement without any deductions, we will subtract for the thickness of the mounts after the order is received.

Our antique black finish is a very deep flat black reminiscent of the hand applied carbon and wax finishes used by yesterday’s blacksmiths.

Our hand applied iron oxide patina finish is the most versatile finish we produce. It is the correct choice for rustic and Tuscan decor and blends perfectly with your oil rubbed bronze, rusty brown, or black iron decor.

Our hand applied burnished silver patina finish has rich nickel silver highlights with antique black iron undertones and blends well with stainless or nickel accessories and decor.

Our hand applied antique gold patina finish has rich deep gold highlights with antique black iron undertones reminiscent of Spanish and Italian treasure.

Curtain rod orders ship within 3-4 weeks via UPS ground.

The maximum length we can ship curtain rods in one piece is 94″ however, we will generally split curtain rods at the mounting points if over 80″. We have developed a system that is invisible, strong, easy to assemble, and will allow you to build a high-quality curtain rod without concern of sagging or poor performance.

To order a French Return on one side only, use the “Special Instructions” box to tell us which side needs an end mount or finial and which side needs a 90-degree return.

Hand-forged custom wrought iron drapery rods

Finely finished, personalized and custom wrought iron curtain rods and hand forged iron hardware crafted from our Paso Robles, California design studio and blacksmith shop.

At Paso Robles Ironworks we’ve created elegant iron curtain rods and drapery hardware, hand forged door and cabinet hardware, and exquisite iron bathroom fixtures. These details throughout your space infuse their magic, forged by fire, in ways you never knew were so significant until now. Founded by a blacksmith in 1985 who knows Paso as a city of cowboys long before it was revered for its vineyards and olive groves. California design with European inspired details, these finely finished wrought iron accessories add character to homes and hotels across the U.S.